Roland ColorCamm PC-50, PrintCUT / PrintCUT Pro 6.5v3

Problem:  

The output of the print job would be stretched vertically up the vinyl.  
Also, If a contour was sent along with the print, the print would be stretched
but the contour is the correct height and position.


Solutions:

The attached file fixed this problem with the Roland PC-50. 

To install this, do the following:
 
1. Backup existing files
2. Decompress the ZIP
3. Copy it into the Output Drivers folder:  Use Windows Explorer and goto following
   C:\Program Files\PrintCUT\OutputDrivers\ 
4. Clear your preferences by going to START>PROGRAMS>PRINTCUT> CLEAR PREFS. icon 
   (Say "Yes" to "Would you like to clear your preferences?")
5. Run Production Manager
6. Add Setup, and configure your Roland PC-50 and the port you are using.
 	
========================================================================== 