******************************************************************
    Roland Dr.Engrave for Windows(R) 95/98/Me/NT 4.0/2000/XP
******************************************************************

WELCOME TO Dr.Engrave!

We do recommend you to read through this document first for your better understanding of Dr.Engrave. This "Readme" file provides some important information to install Dr.Engrave.

If you are reading this file with Notepad, check 'WordWrap' in Edit menu so that you can read more easily.

Explanation here is assuming that you are already familiar with operations on Windows.  The further information about operation on Windows, please refer the user's manual from Microsoft Corp.


Table of Contents

1.  Summary 
2.  System requirements
3.  Installation


* "Windows(R)" and "Windows NT(R)" are registered trademark or trademark of Microsoft(R) Corporation in the United States and/or other countries.
* Pentium are registered trademarks of Intel Corporation in the United States.
* "TrueType" is a trademark of Apple Computer, Inc.

Copyright (C) 1998-2004  Roland DG Corporation



========================================================
1.  Summary 
========================================================

Dr.Engrave is 32 bit application software for Windows to produce many such stuffs like name plates quickly with very easy operation.

Dr.Engrave can create stroke fonts to minimize the time for engraving.  Stroke fonts created by Dr.Engrave can be modified by SFEedit.  
Besides, TrueType font of Windows can be used for engraving that provides very high-quality output.

Dr.Engrave can import data in CSV format from other application software to layout it to text boxes, that allows you to engrave many different text strings (for example, many different names) in the uniform text boxes(name plates) very quickly.



========================================================
2.  System requirements
========================================================

- Microsoft(R) Windows(R) 95, Windows 98, Windows Me, Windows NT(R) 4.0, Windows 2000, or Windows XP operating system
- Internet Explorer 4.0 or higher
- The minimum required CPU for the operating system (Pentium(R) or higher recommended)
- The minimum amount of required RAM for the operating system (32 Mbytes or more recommended)
- 10 Mbytes or more of free hard disk space for installation


========================================================
3.  Installation
========================================================

To install Dr.Engrave, please follow the procedures described below.  You cannot run Dr.Engrave directly from this installation disk.


--------------------
- Installing the program from CD-ROM
Follow the instructions on the setup menu on the CD-ROM to install and set up.


========================================================

If you have further questions or problem, please contact to your local vendor or Roland sales center.
