3DTechnics VersaWorks Support Page

VersaWorks is the Roland RIP package which replaced ColoRIP. It was released in the same timeframe as the EcoSol ink introduction and is now the standard RIP program for all Roland inkjets and print/cut machines.


INDEX
FAQs Manuals Videos Updates:
  1. 4.00 and above will work with metallics.
  2. 2.30 and above will work with vista. v3.03 and above need v3.02 installed first.
Changelogs Profile Info


Home|Products|Pricelist|Support/Downloads|Training|Service/Repairs|About|Locations|Gallery|Contact

This site is optimized for Mozilla Firefox clients. YMMV on other platforms.
Copyright ©2011 3DTechnics Systems Incorporated.
All Rights Reserved.
Last Update: February 08, 2012 17:53

3DTechnics
.
MODELING SOFTWARE
Rhino Flamingo Penguin Bongo Brazil RhinoCam/VisualMill Rhino Gold Rhino Nest Rhino Jewel Rhino Reverse Rhino Terrain Savanna3D MadCAM Orca3D SpaceClaim T-Splines Visual Arq VRay
.
ENGRAVE/CUT SOFTWARE
EngraveLab/SignLab PhotoGrav Wasatch SoftRIP Film Design RWear Studio
.
INKJET PRINT MACHINES
AJ-1000, AJ-740 XJ-740/640/540 FP-740 RS-640/540
.
PRINT/CUT MACHINES
VS-640/540/420 SP-540V, SP-300V XC-540 LEC-540/330/300 UV
.
3D SCANNERS
MINOLTA RANGE/VIVID LPX-1200/600/60 MDX-20, MDX-15
.
MILLING MACHINES
MDX-650/540/500 MDX-40A MDX-20/15
.
JEWELERY MACHINES
JWX-30
.
LASER ENGRAVERS
Trotec 100/300/500 Trotec 1313,FP-100 Trotec FiberMark
.
ROTARY EGX ENGRAVERS
EGX-600/400 EGX-360/350 EGX-30A/20
.
VINYL CUTTERS
GX-640/500/400/300 GX-24 SV-15/12/8
.
LAMINATORS
RSC/RSH/RSL
.
PHOTO IMPACTORS
MPX-90
.
TRIMMERS
VCUT/VCUT_CR
.
TOOLS AND FIXTURES
Holding Sheets Collets/Chucks Carbide Gravers Carbide End Mills Carbide Twist Mills Cutter Blades
.
MATERIALS/FIXTURES
Milling Waxes IPI Lamacoid RS Laminates Tesa Tape Pinbacks/Magnets Frames
.
LEGACY
Legacy Repairs Rhino Marine Roland Machines