3DTechnics Ethernet/Network Support Page
All Roland Models


Some Roland Printers have a daughter-board network card which cannot be addressed directly by the motherboard. For these machines, the network card must be configured externally. See the Nettool page for information on this.

Machines which use a daughter board, and which therefore need to be addressed with Nettools, include the SC-540/545 and the SJ series.

Machines which have the NIC built directly into the motherboard, and which therefore can be addressed directly by the front panel, are the XC-540, VP-540/VP-300, AJ-1000/AJ-740, LEC-300, and newer machines.


INDEX
Ethernet FAQs


3DTechnics